I’m setting up my NETGEAR router for the first time, how do I set it to
I’m setting up my NETGEAR router for the first time, how do I set it to
Access Point Setup Netgear. Netgear Access Point Setup 192.168.1.200, disable DHCP then click apply (in the LAN Settings page), 3. Keep default router mode Steps 1B, 2, and 3 only Package contents • NETGEAR WAX204 WiFi access point • DC power adapter (varies by region) • Ethernet cable • Installation guide A
Wireless Access Points NETGEAR from www.netgear.com
For other versions of Windows, see Microsoft: Change TCP/IP Settings. Step 1: 1 Connect a computer to one of the LAN (not WAN) Ethernet ports at the back of the router
Wireless Access Points NETGEAR
In order to configure the AP, you will have to temporarily configure your computer to have an IP address in the same subnet as the AP default IP address These instructions explain how to set up a NETGEAR wireless router as an access point on a network with another router (the main router) For other versions of Windows, see Microsoft: Change TCP/IP Settings.
Netgear Access Point Setup. The router's IP address is 192.168.1.1 and the Netgear is set to be an access point and the Netgear access point's IP address is set to 192.168.1.2 ¾ To set up the access point with a PoE switch: Connect an Ethernet cable from the yellow WAN PoE port on the access
AC1200 R6220 as an Access Point NETGEAR Communities. If this PC is already part of your network, record its Connect the wireless access point to your computer