No spark, new harness, weird connectors? DRZ400/E/S/SM ThumperTalk

Drz400 E No Spark. Need help with a 04 drz 400 no spark issue DRZ400/E/S/SM ThumperTalk Checked all the wiring for continuity, and it all seems okay GROOVY2 · #5 ·May 18, 2013 (Edited) Before you pull engine apart - remove the spark plug and hook up a air compressor into spark plug hole - (Use compression tester hose ) spin engine over while blowing high pressure air into spark plug hole while spinning engine over with e start - if there is something small like a grain of sand or tiny piece of gasket or carbon on valve seat it Could.

Double check all your connectors, make sure the coil plug is sitting all the way onto the spark plug That's the fastest way to check the four possible miswirings on that, especially if you ordered the stator for.

E to Sm wiring no spark DRZ400/E/S/SM ThumperTalk

Before doing this job , my battery would drain a few days after charging it 2003 DRZ400E No Start Issue Discussion in ' Thumpers ' started by UNSTUCK, Sep 1, 2010. If that doesn't work unscrew the spark plug and plug it into the coil and run the starter, visually confirm if the spark plug is indeed sparking or not

Dead DRZ ! No spark after rebuild , but why ? HELP ! DRZ400/E/S/SM. Go up to the connector where the stator cable plugs into the ECU Please can I ask your advice on how to fix it? Here's what happened: • We live in an area with a high rainfall and the bike stood on a porch (under roof but not a side wall) for approximately 2 months) • In t.

DRZ400e pulsar coil, stator wiring correct no spark DRZ400/E/S/SM. Hi I'm looking for some help I've bought a drz 400 05 plate Hi, I have a DRZ400E (and an XR600) and the DRZ has recently stopped running - no spark